How to install curtain curtain hanging

When you want to decorate the window more beautiful, you will go to buy beautiful curtains, imagine the warm screen after installation. That kind of excitement made us difficult to control, but after the curtains were bought back, I wanted to ask people to install and I was afraid to be deceived, how to install the curtains myself, and what the curtain hangings were.

How to install curtains

1. Prepare the curtain you purchased first, and the hooks and nails of some small parts. Then draw a fixed position of the line, measure the fixed hole distance, and the size of the required mounting rail to facilitate preparation before construction.

2. The track of the curtain is also divided into three types: single track, double track and three track, respectively, and the curtain box is generally first tracked. Rehearsal rails should be machined screws; dark curtain box should be after the safety track, re-curtain track small angle should be encrypted spacing, wood screw specifications not less than 30mm.

3. Install the curtain rod, correct the connecting fixtures, and install the curtain rod or wire to achieve the same room elevation. Standard curtain track, the basic width should generally be more than 15CM, the monorail can be reduced as appropriate.

4. Adjust the position: floor-standing curtains or curtains hanging over the table, when installing the track should allow the width of the window sill, to avoid obstruction when the curtain hangs and become unsightly.

What are the curtain hanging?

1. In accordance with the method of wearing a small pleat hole number with the serial number 1,2,3,4 marked in the corresponding hole, and then in the four teeth of the four prongs were inserted, wear the third one Two hooks are spaced 3-4 holes apart.

2. This is the middle fold wear method. It inserts a hole with a serial number in accordance with 1, 2, 4, 5, or four four-tooth hooks. The number of holes in the hole number is 1 hole and the third one is worn. Two hooks are spaced 4-6 holes apart, generally 7-8 hooks per meter.

3. The use of large pleats in accordance with 1,3,8,9 wear, four pins of the four-tooth hook were inserted into the serial number 1389 hole in the cloth, the middle hole, wear the third fork; The hooks are spaced 6-8 holes apart. The pleats of this curtain looked a bit like a butterfly. There are also column wear methods, Korean wear methods, and South Korea wear methods.

Summary: The above is the information that Xiao Bian brings to you today on how to install curtains and curtain hangings. I believe that my friends also have a certain understanding. We can refer to it and I hope this article will help you.